[PSUBS-MAILIST] SeaQuestor progress- HP air rack

[T Novak via Personal_Submersibles]

Hi David,

Excellent idea.  I would have thought that the tank boots would have fit really tightly around the scuba tank.  Are the tank boots used meant for tanks larger than the 80cuft tanks?

Tim

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of David Colombo via Personal_Submersibles
Sent: Sunday, March 31, 2019 9:42 PM
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] SeaQuestor progress- HP air rack

 

Hi Guys, I decided to work outdoors today on the hp air tank rack. After a couple hours of fine tune grinding and cutting out the bottom of the upper tank boots the rack and boots are now ready. I am using tank boots as tank support and as a guide. The fiberglass exoskeleton will hide the entire tank except for the upper 4 inches of the tanks and valves. I thought was going to mock up the rear thrusters and linkage, untill I discovered that the hole cut thru the tank rack was cut 1/4" two small,  so back to the grinding. 

David

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190401/5367c892/attachment.html>