[PSUBS-MAILIST] SeaQuestor progress

[Rick Patton via Personal_Submersibles]

Looking good! Nice rolling work as well. T bar can be tricky to accurately
roll.
Rick

On Sat, Sep 8, 2018 at 5:19 PM Alec Smyth via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> David, I'm impressed with those rolled stiffeners, which can't have been
> easy! And do elaborate please... a periscope tube????
>
> :)
> Alec
>
> On Sat, Sep 8, 2018 at 8:07 PM David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>> Hi guys, well we had progress this week, even if the cnc plasma machine
>> quit working before our 3/4" sail plate was cut. All of our t-rings were
>> rolled, and the forward sail tower template was completed, dry fit into the
>> opening and then transcribed into the computer for the cnc plasma to cut
>> once it's back up and running. All hull penetratation size and locations
>> verified and ready to be cut next week. Next week, periscope tube, and 6"
>> dia thru hull holes, forward and aft equipment frames to be cut and fit.
>> David
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180908/b608350c/attachment-0001.html>