[PSUBS-MAILIST] Alan's new motor

[Alan via Personal_Submersibles]

Hank,
yes very patient "lol" as this might not be the final version.
I have tested the motor out of the housing in a bucket of oil & established
that it could only be run at 30 Amps without overheating. It causes quite 
a turbulence running in oil with no prop on due to the open design of a rotating 
back section. It will want to force oil out of the housing & up the oil feed tube,
but I am hoping the overpressure from my oil compensator will keep the oil
in around the motor. 
Am learning a lot on each attempt.
Alan



> On 3/10/2018, at 9:06 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Alan, your patience is amazing.  I would be itching to test it before sending it away for anodizing.  
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20181003/a380a56a/attachment.html>