[PSUBS-MAILIST] HP Scuba hose

Sean T. Stevenson via Personal_Submersibles personal_submersibles at psubs.org
Sun Mar 11 13:26:03 EDT 2018


Well, SCUBA cylinders are usually supplied with valves with either CGA-850 or DIN 477 orifices, and you can find connectors / adapters for both to adapt directly to either gender NPT, and if you don't need the cylinder valve, in North America the cylinder neck threads are likely 3/4-14 NPS, which you can also tie into directly if that suits your application.

Sean

-------- Original Message --------
On Mar 11, 2018, 10:15, Jon Wallace via Personal_Submersibles wrote:

> Is there some other way to tap HP off a SCUBA tank other than first stage regulator?  I was thinking of running the HP hose to a manifold that would feed the ballast tanks.
>
> ---------------------------------------------------------------
> From: Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org>
> To: personal_submersibles at psubs.org
> Sent: Sunday, March 11, 2018 10:54 AM
> Subject: Re: [PSUBS-MAILIST] HP Scuba hose
>
> HP SCUBA regulator orifice is 7/16-20 UNF 2B thread. There are Swagelok and other fittings which will work, but watch your wrench clearances when using multiple adjacent ports. On that note, LP SCUBA ports are either 3/8-24 UNF - 2B (most common) or 1/2-20 UNF - 2B (less common). Be aware that while most HP SCUBA SPG hoses have a pinhole bore in order to reduce the consequences of a HP hose failure, some SCUBA regulators incorporate the pinhole restriction into the regulator itself, which will limit the available flow rate at high pressure. Of course, if your drawing gas off at high pressure anyway, why go through the reg?
>
> Sean
>
> Sent from ProtonMail mobile
>
> -------- Original Message --------
> On Mar 11, 2018, 07:12, Jon Wallace via Personal_Submersibles < personal_submersibles at psubs.org> wrote:
>
>>
>
> Are there adapters that can change a SCUBA HP hose fitting to NPT?
>
> Jon
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180311/d2251222/attachment.html>


More information about the Personal_Submersibles mailing list