[PSUBS-MAILIST] SeaQuestor Fabrication

Sat Jun 16 09:46:53 EDT 2018

Great news! Can’t wait for more pictures.
Rick

On Sat, Jun 16, 2018 at 2:09 AM hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> David,
> Very nice to see.
> Hank
>
> On Friday, June 15, 2018, 8:33:58 PM MDT, David Colombo via
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>
> Hi Guys,
> Well after many years of planning and talking and sketching and
> engineering The SeaQuestor is finally under construction. While my Youtube
> channel is under construction as well I'm not supposed to let the cat out
> of the bag so to speak, but I figured that did not include my Psub
> Community. All pressure hull parts were cut on the plasma cadcam table last
> week and the first hull section was bump and rolled. Friday we will be
> shaping the cone section of the hull and the sails. The ASME welding shop
> is prepping for the parts arrival in the next couple of weeks for fit and
> finish and lots of welding. Stay tuned for videos of the complete build
> process once we launch the SeaQuestor Youtube channel.
>
>
> Best Regards,
> David Colombo
>
> 804 College Ave
> Santa Rosa, CA. 95404
> (707) 536-1424
> www.SeaQuestor.com
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180616/409bb799/attachment.html>