[PSUBS-MAILIST] K-250 HP Manifold Example

[hank pronk via Personal_Submersibles]

 Steve,Nice, and I see thread tape ;-)Hank
    On Monday, January 22, 2018, 3:27:09 PM MST, Steve McQueen via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Forwarding with an updated subject.

-----Original Message-----
From: Steve McQueen [mailto:psub101 at indy.rr.com] 
Sent: Tuesday, January 16, 2018 7:07 PM
To: 'Personal Submersibles General Discussion'
<personal_submersibles at psubs.org>
Subject: Emailing: IMG_20180115_210324763[1]

All, I am sharing a photo of my HP manifold build. All my K-250 HP plumbing
is centralized here. Fits between 2 frames and the whole mounting
bracket/assembly is easily removed for maintenance. Not too big, but spread
out enough to easily operate. Fed by 2 independent external scuba  bottles
through one way check valves. Control output valves to fwd/aft soft ballast
tanks. Isolation output valve to BIBS. Manifold pressure gauge. 

I am also locating the O2 flow meter on this mounting bracket.
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180122/1a0d943f/attachment.html>