[PSUBS-MAILIST] LED light

[hank pronk via Personal_Submersibles]

 Alan, yes 24,000 lumen and I am running it on 24V  and the driver is in the oil and tested to 1,500 psiHank
    On Monday, February 19, 2018, 12:41:33 PM MST, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hi Hank,I just saw it on facebook; 2,400 lm, so is it about 240W?Are you running it with a 36V dc system?I have tested a single 8000lm led to 2000psi, but all the dc drivers I have seenhave had those big cylindrical electrolytic capacitors & so haven't botheredtesting the drivers & instead have them in the hull.Cheers Alan

Sent from my iPad
On 20/02/2018, at 7:36 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:


HI All, I sent an earlier post with picture and doubt it made it.  I have just tested my LED light internal components to 1,500 psi and the light works fine still.  So there is no need for pressure housings with LED lights, the components can handle at least 3,000 feet.Hank

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180219/6c949a89/attachment.html>