[PSUBS-MAILIST] mbt test

[hank pronk via Personal_Submersibles]

The pressure hull is 48 inches ID  and 1 inch thick
Hank

Sent from my iPhone

> On Aug 26, 2018, at 5:38 PM, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Looks great Hank.  What is the diameter of the pressure hull?
> 
> 
> From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
> Sent: Sunday, August 26, 2018 4:09 PM
> Subject: [PSUBS-MAILIST] mbt test
> 
> Hi All,
> Today I did my second test of E3000 to establish freeboard and check surface stability with mbt's installed.   The stability is fantastic, I can walk all over the the top of the sub with very little leaning.  The freeboard is 12 inches, add the sail to that and this sub can easily be boarded in waves.  The best part is it only drafts 37 inches.
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180826/f3aacfc0/attachment.html>