[PSUBS-MAILIST] Minn Kota lower unit material

[Philippe Robert via Personal_Submersibles]

Ok. thanks. I think to weld my penetrator to it. (at the place of the
original shaft)

Philippe

2018-04-29 15:15 GMT-04:00 Cliff Redus via Personal_Submersibles <
personal_submersibles at psubs.org>:

> I have a number of Minn Kota 101 lower units, MK part number 2886289.
> While I don't have anthing from MK on materials, I tend to agree with Hank.
>
> 1) Main body that has the permanent magnets attached is some kind of steel.
> 2) Brushed end assembly that holds the shaft bushing and lip seals is cast
> aluminum (probably 6061-T6)
> 3) Bow end of lower unit that holds a bearing is also cast aluminum
> (probably 6061-T6)
>
> Cliff
>
>
>
> On Sat, Apr 28, 2018 at 7:11 PM, Philippe Robert via Personal_Submersibles
> <personal_submersibles at psubs.org> wrote:
>
>> Hi,
>>
>> I have a question about Minn Kota engine Housing. What kind of steel is
>> made ?
>>
>> Thank you,
>>
>>
>> Philippe
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180429/53b1991f/attachment.html>