[PSUBS-MAILIST] Heads Question

[Alec Smyth via Personal_Submersibles]

Ugh, mental typo. I meant "un-beveled" and "bevel them yourself", not
"un-flanged" and "flange them yourself".

!!!!!!!

On Fri, Sep 15, 2017 at 5:25 PM, Alec Smyth <alecsmyth at gmail.com> wrote:

> Hi Roberto,
>
> I believe the short description for what you need is flanged, beveled, and
> code. You could get them unflanged, but it takes quite a while to make a
> flange with an angle grinder. The flanges if I recall are 2". Do set up a
> project page or something so we can follow progress!
>
>
> Best,
>
> Alec
>
> On Fri, Sep 15, 2017 at 5:07 PM, roberto alvarez via Personal_Submersibles
> <personal_submersibles at psubs.org> wrote:
>
>> Hi, lost the plans cd for the k250, i am  interested in the  head
>> selection, i found a seler in california and have
>> flanged ,beveled ,code, non code,
>>
>> Will apreciate your support in this ( until i found the plans cd )
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170915/5364e094/attachment-0001.html>