[PSUBS-MAILIST] Pressure Test Chamber

[Alan via Personal_Submersibles]

Thanks Hank,
Alan

Sent from my iPad

> On 21/06/2017, at 1:05 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Alan,
> Both will work,  slick idea!
> Hank
> 
> 
> On Tuesday, June 20, 2017 7:00 PM, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> I am making a plastic container to fill with water & stand inside my
> pressure chamber. There is a gap between the wall of the container
> & the chamber which I intend to fill with oil. There will be about an
> inch of air at the top of the chamber & I'm using a scuba tank to
> pressurise the unit up to 3000psi.
> Will car engine oil do to fill the gap between my plastic container &
> the chamber wall, or do I need to go with a hydraulic fluid.
> Am using the plastic container to keep water from rusting my test
> chamber. (Aussie Steve's idea)
> Cheers Alan
> 
> Sent from my iPad
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170621/7c256ce4/attachment.html>