[PSUBS-MAILIST] HY-100 full sphere, 42" ID, 1.40625" shell thickness + 3/32" corrosion allowance (1.5" total)

[hank pronk via Personal_Submersibles]

Sean,I request a quote from Master Source in Akron Ohio.  They have not replied and given my history doubt they will.   I will have to phone them since my emails do not have that polished engineers touch.  They likely don't take me seriously.Hank 

    On Tuesday, July 18, 2017 12:07 PM, Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Who did you request a quote from?Sean


On July 18, 2017 5:47:45 AM MDT, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Scott,I sent a request for a quote, so I am not sure yet that I have a source yet.Hank 

    On Tuesday, July 18, 2017 2:06 AM, Scott Waters via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Hank,
Where is your source for HY-100?
Thanks,Scott Waters


Sent from my U.S. Cellular® Smartphone
-------- Original message --------From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> Date: 7/18/17 2:56 AM (GMT-06:00) To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> Subject: Re: [PSUBS-MAILIST] HY-100 full sphere, 42" ID, 1.40625" shell thickness + 3/32" corrosion allowance (1.5" total) 
Thank you Sean,Good to know it can dive even at high tide ;-)  Now I can find out  if it is more cost effective to use HY-100 and less foam or 516-70 and lots of foam.Hank 

    On Monday! , July17, 2017 8:42 PM, Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

   Finally, because I thought you might end up asking for it, here is the sphere using 1.5" thick HY-100, where 1-13/32" is considered in the working depth calculation, and the remaining 3/32" is the applied corrosion allowance which does not contribute to working depth, but does affect the final weight and buoyancy characteristics.  The mean and outer diameter indicators do not update after the corrosion allowance is applied, but these dimensions would be 43.5" and 45" respectively.  In this iteration, you need about 770 lbs of supplemental buoyancy, but you can put her deep in the mud beside Titanic at high tide without issue. Sean
  
   _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   

Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170718/a148afb6/attachment.html>