[PSUBS-MAILIST] Shaft Seals/ CO2

[Rick Patton via Personal_Submersibles]

Thanks Emile!

Rick

On Thu, Feb 2, 2017 at 10:31 AM, emile via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Rick,
>
>
>
> No O2 . I prefer to have a separate O2 monitor . Better when one breaks
> down.
>
>
>
> It seems a US based company. http://www.extech.com/category/?id=14861
>
>
>
>
>
> Emile
>
>
>
> *Van:* Personal_Submersibles [mailto:personal_submersibles-
> bounces at psubs.org] *Namens *Rick Patton via Personal_Submersibles
> *Verzonden:* donderdag 2 februari 2017 19:51
> *Aan:* Personal Submersibles General Discussion
> *Onderwerp:* Re: [PSUBS-MAILIST] Shaft Seals/ CO2
>
>
>
> Emile,
>
>
>
> Thanks. does it do 02 as well? and do they have a USA rep?
>
>
>
> Rick
>
>
>
> On Thu, Feb 2, 2017 at 8:36 AM, emile via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Rick, All
>
>
>
> I use this as a cheap alternative.
>
> https://www.conrad.nl/nl/extech-co100-luchtkwaliteitsmeter-103741.html
>
> Up to 10.000 ppm.
>
>
>
> Br, Emile
>
>
>
> *Van:* Personal_Submersibles [mailto:personal_submersibles-
> bounces at psubs.org] *Namens *Rick Patton via Personal_Submersibles
> *Verzonden:* donderdag 2 februari 2017 19:16
> *Aan:* Personal Submersibles General Discussion
> *Onderwerp:* Re: [PSUBS-MAILIST] Shaft Seals
>
>
>
> I was asked about my gas analyzer the other day which I've had for 11
> years and after checking into it, the company "Biosystems Inc." had been
> sold to Honeywell and my unit was discontinued and can't even get it worked
> on or buy new sensors as of last year. It did 4 gasses but C02 wasn't one
> of them as I used it for something else.
>
> Brandt instruments in Prariyville LA. has a system that does only O2 & C02
> only and sells for $1,205 for the Alkalide battery set up. They said that
> the replacement sensor for the Co2 was about $1,000 though!
>
> I guess I,ll use my old one now as an expensive paper weight! 😬
>
>
>
> Rick
>
>
>
> On Wed, Feb 1, 2017 at 5:23 PM, Brian Cox via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Interesting ! ,  found their website
>
> --- personal_submersibles at psubs.org wrote:
>
> From: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org
> >
> To: "Personal Submersibles General Discussion" <
> personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] Shaft Seals
> Date: Wed, 1 Feb 2017 18:41:50 -0800
>
>
>
> Speedy sleeve ?
>
> --- personal_submersibles at psubs.org wrote:
>
> From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.
> org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.
> org>
> Subject: Re: [PSUBS-MAILIST] Shaft Seals
> Date: Thu, 2 Feb 2017 02:15:34 +0000 (UTC)
>
> Brian,
>
> Make a speedy sleeve.  No biggy
>
> Hank
>
>
>
> On Wednesday, February 1, 2017 6:45 PM, Brian Cox via
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>
>
> Hi All,
>
>                 Got myself into bit of a bind,  my 2.5" OD by 1" ID shaft
> bearing is fine, but it turns out that they don't make a seal that exact
> size.  They have under and over ,  so what I might do is epoxy the two
> shaft seals together so I can get to where I need to be.   They make a
> 2.5"OD by 1.25"ID  seal;   on my next motor pod I may change the propeller
> shaft to 1.25" just to make things easier !
>
>
>
> Brian
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org http://www.psubs.org/mailman/
> listinfo.cgi/personal_submersibles
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> <http://eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170202/5d93647a/attachment-0001.html>