[PSUBS-MAILIST] glueing aluminum

[roberto alvarez via Personal_Submersibles]

I think you will need the 97463 loctite aluminum putty, is an epoxy with
aluminum dust, i use to fix the recoil starter mounting base on a kohler 8
hp as was hard to reach for welding, my ideawas for a temporal repair, but
hold very well is  like the marine tex for aluminum LOCTITE FIXMASTER
ALUMINUM PUTTY 93463, find the specs and try, just have to remove the oxide
from the Al with an ss wire brush, hope this help

2017-12-23 0:57 GMT+01:00 hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org>:

> Hi All,
> I have an idea that requires glueing aluminum plates together.  Has anyone
> tried this?  any success?
> Hank
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171223/b22adc54/attachment.html>