[PSUBS-MAILIST] Tap instead of weld

[Emile van Essen via Personal_Submersibles]

Jon , Conversion mistake

The hull should be 1/2"thick.

Br, Emile

-----Oorspronkelijk bericht-----
Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org]
Namens Jon Wallace via Personal_Submersibles
Verzonden: vrijdag 18 augustus 2017 15:43
Aan: Personal Submersibles General Discussion
Onderwerp: [PSUBS-MAILIST] Tap instead of weld


On a thicker hull, installing a small penetrator (1/4 male NPT), is there
any structural reason why one could not just drill a tap such a fitting
instead of welding it?


Jon

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles