[PSUBS-MAILIST] Co2 scrubbers on eBay

[Alec Smyth via Personal_Submersibles]

Hi Brian,

I think this is virtually identical to the scrubbers on Snoopy and
Shackleton. If it's any help, I use Delta Electronics model BFB0712H, which
is readily available from say Digikey. A handy way to install these is just
with bungee cords around the barrel.


Best,

Alec

On Sat, Apr 22, 2017 at 1:15 PM, Brian Hughes via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Let's keep in touch and compare notes. Some initial thoughts:
>
> I have two different style fans inbound, a straight through and a radial.
> Because the canister loads on the opposite side of the discharge, it means
> either I'll mount it vertical with the radial fan on the bottom probably
> all the way aft or horizontally along the aft ceiling with the straight
> flow discharge pointing forward.
>
> Poking around the web it looks like these were designed to be mounted
> horizontally along the top of a deco chamber. If I went with that, I was
> thinking a couple squeeze buckle quick disconnect straps attached to two
> ribs and the ends of the canister drilled and tapped for the other bits. In
> other words, it could hang down a little, but not rigidly attached. Unclip
> to remove to refill, etc, Your thoughts?
>
> Brian
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170422/47c79b62/attachment.html>