[PSUBS-MAILIST] Oil Compensator

[Jon Wallace via Personal_Submersibles]

Hi Hank,
No, I don't have the shaft, I purchased just the lower head.  A 36 inch shaft is $28 but like you said, I really only need a few inches of it so don't really want to purchase it that way.
Jon 

    On Thursday, April 13, 2017 8:27 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Jon, Do you have the shaft that used to screw into the motor?  if so, you can cut it down to a couple inches long and put a waterline compression fitting on that.   Then reduce from the compression pipe thread.  Or you can thread the inside of that stub shaft with a pipe tap and reduce from that, providing it is the heave fibreglass shaft.Hank 

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170414/3df41b78/attachment.html>