[PSUBS-MAILIST] Minn-Kota Shaft Seals
Jon Wallace via Personal_Submersibles
personal_submersibles at psubs.org
Mon Apr 10 22:30:45 EDT 2017
It is on the RIPTIDE MK101 although it looks like you'd have to drill
through the outside of the housing to get access to the void and then
seal the outside shell somehow. You'd also want to measure twice before
drilling...I think there's only about a 6-8mm void between the seals.
Jon
On 4/10/2017 7:30 PM, Sean T. Stevenson via Personal_Submersibles wrote:
>
> Is it possible to drill and port a channel to the inter-seal volume on
> one of those motors?
>
> Sean
>
More information about the Personal_Submersibles
mailing list