[PSUBS-MAILIST] Motor Pod

[Alan via Personal_Submersibles]

Brian,
I can't see a split pin in front of the propeller nut!
May be just hard to view, but I remember Alec lost a 
prop, I think while reversing.
Alan

Sent from my iPad

> On 9/04/2017, at 6:48 AM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi Everybody,
>                             I finished my Port side motor pod.  Did a pressure test up to 10psi ,  still waiting on the silicone oil .  But it ran really smooth, had a bit of trouble when I machined the end caps, they weren't totally perfect, think I'll have the machine shop make a stab at it .  There were difficult to line up in my lathe and they were literally at the very maximum size my lathe could do.  But all my snap rings and o rings and epoxy thru hulls are good to go !
>  
> Pics:
> <Pod1.jpg>
> <Pod2.jpg>
> <Pod3.jpg>
> <Pod4.jpg>
> <Pod5.jpg>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170409/b5441593/attachment.html>