[PSUBS-MAILIST] Charger - internal or external?

Mon Jan 11 15:11:13 EST 2016

Delta-Q makes a nice, compact waterproof charger. Anyone mount their chargers internally? Thinking …

Maryland Brian

Sent from Microsoft Surface

From: personal_submersibles at psubs.org
Sent: ‎Monday‎, ‎January‎ ‎11‎, ‎2016 ‎9‎:‎27‎ ‎AM
To: personal_submersibles at psubs.org

Send Personal_Submersibles mailing list submissions to
 personal_submersibles at psubs.org

To subscribe or unsubscribe via the World Wide Web, visit
 http://www.whoweb.com/mailman/listinfo.cgi/personal_submersibles
or, via email, send a message with subject or body 'help' to
 personal_submersibles-request at psubs.org

You can reach the person managing the list at
 personal_submersibles-owner at psubs.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Personal_Submersibles digest..."

Today's Topics:

   1. Re: Fw: flang facing (James Frankland via Personal_Submersibles)
   2. Re: Fw: flang facing (via Personal_Submersibles)

----------------------------------------------------------------------

Message: 1
Date: Mon, 11 Jan 2016 11:18:53 +0000
From: James Frankland via Personal_Submersibles
 <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion
 <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Fw: flang facing
Message-ID:
 <CAHpB=UAv989uqZ2aYmKBBtfPy19BJ=m17k_VXOGEUbZJV2O0Xw at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

>I am sure all sub builders have had there wife help out, I am sure there
are some good stories,,,,Brian....

I got Anita to help paint the inside of my sub with epoxy paint.   She
wasn't very happy with the limited dust suit, mask and gloves I provided
but I just said "oh you'll be ok" and shoved her inside, brush in hand.
She got paint in her hair which was impossible to get out and eventually
had to have her hair cut short.   Ive just about recovered from the ear
bashing now and I had to take her on holiday in compensation...... :)

Regards
James

On 11 January 2016 at 01:56, hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Alan,
> Yes I have air because the port is not in yet, the hatch pops up super
> easy because it is a steeper angle than tooling.
> Speaking of that, I am machining the ports next, I will practice on the
> small ports first because I have extras.
> Hank
>
>
> On Sunday, January 10, 2016 6:13 PM, Alan James via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
> Glad you got your wife on board Hank.
> I was thinking of how tapers are used to hold tooling in & wondered
> If you got inside & the hatch jammed would you have air?
> Alan
>
> ------------------------------
> *From:* hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org>
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Sent:* Monday, January 11, 2016 1:48 PM
> *Subject:* Re: [PSUBS-MAILIST] Fw: flang facing
>
> Thank you Steve, seems the ugliest inventions work the best ;-)    I
> should get some blue indicator just to have it on hand, good idea.
> Hank
>
>
> On Sunday, January 10, 2016 5:45 PM, hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
> Okay, No problem, I told my wife what I was up against and she insisted
> she could manage it.  I gave her a lesson in chain come  along operations
> and we did a dry run, including tapping the hatch level.  I hopped in
> feeler gauges in my teeth and flashlight in hand, She did a perfect job,
> rolled the gantry in place lowered and leveld the hatch in place.  My angle
> is off by .004 in , that is not bad for a rookie with limited tooling!
>  tomorrow I will take it down some more with the angle corrected and when
> my bride returns from work I will test fit again before the final sizing.
>
> I am sure all sub builders have had there wife help out, I am sure there
> are some good stories,,,,Brian....
> Hank
>
>
> On Sunday, January 10, 2016 5:05 PM, hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
> Thanks Alan,
> Hey guys I have a tricky situation here.  I have lowered the hatch onto
> the conical seat and it fits nice or at least as far as I can tell.  I am
> alone in this mission so I can not get inside the sphere and place the
> hatch on the land by myself  to determine if the fit is correct from
> inside.  How can I determine if the two angles are fitting perfect?
>  without being inside.  I was thinking about plasti gauge for engine
> rebuilding, it is a little plastic wire that squeezes to a certain
> thickness for a given gap.
> Maybe there is a better idea out there.
> I still have to take the hatch OD down about .050 in so I have wiggle room
> to adjust the angle if need be.
> HELP
> Hank
>
>
> On Sunday, January 10, 2016 3:11 PM, Alan James via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
> Thanks for the update Hank,
> it's moving along quickly.
> Alan
>
>
>
> ------------------------------
> *From:* hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org>
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Sent:* Sunday, January 10, 2016 11:22 AM
> *Subject:* [PSUBS-MAILIST] Fw: flang facing
>
> New video
> Hank
>
> On Saturday, January 9, 2016 3:21 PM, xxx xxxxx <mp13 at live.ca> wrote:
>
>
> https://www.youtube.com/watch?v=eweppPfzZrw
>
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160111/b4a76f42/attachment-0001.html>

------------------------------

Message: 2
Date: Mon, 11 Jan 2016 07:28:10 -0700
From: via Personal_Submersibles <personal_submersibles at psubs.org>
To: "Personal Submersibles General Discussion"
 <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Fw: flang facing
Message-ID:
 <20160111072810.49e8347f125ba4e1b2aff75c01b07c1e.1be748666b.wbe at email13.secureserver.net>

Content-Type: text/plain; charset="us-ascii"

An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160111/e8a6b6f6/attachment.html>

------------------------------

Subject: Digest Footer

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.whoweb.com/mailman/listinfo.cgi/personal_submersibles

------------------------------

End of Personal_Submersibles Digest, Vol 31, Issue 32
*****************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160111/0d4a7c55/attachment.html>