[PSUBS-MAILIST] Electrical thru-hull

Sun Feb 7 12:43:33 EST 2016

Delrin (acetal) is a more dimensionally stable plastic than nylon, and will not absorb moisture to the extent that nylon does.

Sean

On February 7, 2016 9:41:48 AM MST, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>Hank, I need penetrators for 36vdc power to motors (50amp), 12vdc power
>
>to lights (20amp), and other small electronic sensors.   Any thoughts 
>about delron or nylon as a body for machining.  Attached is a design
>for 
>threaded rod through delron that I came up.  The nuts on the threaded 
>rod probably not necessary if locktite or epoxy is used on the threads 
>before driving it into the thru-hull body.
>
>Jon
>
>
>
>On 2/6/2016 2:24 PM, hank pronk via Personal_Submersibles wrote:
>> Jon,
>> What do you have to work with in terms of hole in hull. What amp are 
>> you trying to run through.
>> Hank
>>
>>
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160207/0db522d3/attachment.html>