[PSUBS-MAILIST] cutting Titanium

[Rick Patton via Personal_Submersibles]

Hank, Don't think you are going to find a mobile plasma cutter that will do
that.

Rick

On Fri, Dec 23, 2016 at 8:38 AM, hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Rick,
> It is 2 inches thick, I think.
> Hank
>
>
> On Friday, December 23, 2016 10:40 AM, Rick Patton via
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>
> Hank,
>
> Do you know how thick it is? I would think a plasma cutter would work or a
> thermal lance but that leave a pretty crude cut.
>
> Rick
>
> On Fri, Dec 23, 2016 at 6:08 AM, hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Hi All,
> Looks like I can buy the old Sever submarine in Alabama.  The sub is WAY
> to big to be practical, so I am am in need of advice on how to cut the
> titanium heads off the pressure hull.  Does anyone have experience with
> cutting heavy titanium?
> Hank
>
> ______________________________ _________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs. org <Personal_Submersibles at psubs.org>
> http://www.psubs.org/mailman/ listinfo.cgi/personal_ submersibles
> <http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles>
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161223/f74b56a2/attachment.html>