[PSUBS-MAILIST] Speed controllers
Alan James via Personal_Submersibles
personal_submersibles at psubs.org
Fri Apr 22 19:35:50 EDT 2016
Alec,in hindsight I would advise the Minn kota controller above the Kelly.My Kelly brushless controller has about 30 wires coming out of it & mostof them are irrelevant to my use. They cover all the bases for a multitudeof operating options for various traction vehicles. Then you need to program it, which involves understanding the terminology. I wired mine up & had 3 sets of fault signals blinking at me. It now worksbut my motor is running twice the speed it should. ( a brushless Phase problem probably)The Minn kotta controller is designed specifically for that motor & application.Cheers Alan
From: Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Sent: Friday, April 22, 2016 12:30 AM
Subject: Re: [PSUBS-MAILIST] Speed controllers
You're right Alan, the tractor control would be pretty simple. Did you use the joysticks' side-to-side axis for anything, or just the forward-back?
On Wed, Apr 20, 2016 at 10:59 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Alec,on my ambient I have 2 x 2 axis joysticks (play station 2 controller)Forward & backward of the horizontal thrusters on the forward backward axis &up & down of the vertical thrusters with the left & right axis.I used to angle the controller in my hands to the left, so when pushing the joystick to the elevated side of the controller you went up. With the tractor steering, pushingone joystick forward & the other back turned you like turning bicycle handlebars.It is very intuitive & I can't remember thinking "now what makes what go where".It is a great system for handing to a novice.When I was looking at semi-industrial joy sticks there seemed to be options withinmodels for "spring to center" I am sure they must have this option on a rotating axis.Alan
From: Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Sent: Thursday, April 21, 2016 1:11 PM
Subject: Re: [PSUBS-MAILIST] Speed controllers
That was very timely for me Cliff, thanks. I'm curious, given your use of a foot control for throttle, whether you are using the joystick angle. That is, I understand if you move the stick forward the sub goes forward, back is reverse, and neutral is stopped. But is anything different between say the joystick half way forward or all the way forward?
I can't really use a pedal because my controls are to be portable so they can be handed off between occupants and used anywhere on the boat. I'm considering two control paradigms and wonder whether anyone here can envision a preference, or maybe some other idea. You all just became my focus group! I should say I loved the "depth knob" concept on Snoopy, whereby one knob controls vertical thrust, so I'm keeping that no matter what I do with the joystick.
1) Rotating joystickJS Forward/back --> sub goes forward/reverseJS Side to side --> crabbing (side thrusters are angled, and run in opposite directions to crab)
JS rotation --> increase one stern thrusters, decrease the otherVertical thumb wheel --> dive-surface ("depth knob")
2) Non-rotating joystickJS Forwar/backd --> sub goes forward/reverseJS Side to side --> "virtual rudder" increasing speed to one stern thruster, decreasing to the other
Vertical thumb wheel --> dive-surface
Horizontal thumb wheel --> crabbing
In all cases, the thruster speed would be proportional to the command input. One thing I'm unsure of is whether the rotating joysticks have any return-to-neutral bias. Do they just stay rotated if you let them go? Is there a click as you go through zero degrees? With the other two axes, your hand knows where things are at, but I'm not sure how that works with rotation since I have not actually handled one of these joysticks yet.
Thanks,
Alec
On Wed, Apr 20, 2016 at 7:50 PM, Cliff Redus via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Alan, I use a foot control from OEM controls. This is a hall effect potentiometer made for mobile heavy equipment. It is very beefy. http://www.oemcontrols.com/datasheets/hfp4.pdf is a link to the unit. I am using model number HFP4M17445. This a heavy duty commercial grade foot control. The version I have sends a 0-5vdc signal with the 2.5V as the neutral position, 5V for full forward and 0v for full reverse. I have really been happy with the unit. Feels rock solid. I take the signal into my PLC on an analog input channel. I have some ladder logic that enable me to integrate both the foot control signal and the rotation axis of my 3 axis joy stick control to both aft horizontal thrusters. If the joy still rotary axis is in neutral position, then both aft thrusters get the same signal such that the more forward you push on the foot control the more forward thrust, the faster you go. When you push down with your heal the thrusters reverse proportional to the how far back you tilt the foot control. This gives me great forward/reverse and control. When the joy stick is rotated in a clockwise manner, in PLC ladder logic I start increasing the speed of the port aft horizontal thruster and decreasing the speed of the starboard aft thruster. This enables me at speed to turn to the starboard side. Rotating the joystick in the counter clockwise direction caused the boat to turn the port side. If the foot control is in the neutral position, then rotating the joy stick rotates the boat about its center of gravity. I have really been happy with how much control this gives at any speed.
Now on the negative side, the foot controller is expensive at $328. I am sure with a little looking you could find one that does the same thing at a reduced cost.
On Wed, Apr 20, 2016 at 2:22 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Cliff,can you tell me a bit about your foot controls.Is it an off the shelf system? Is it forward, back,up & downon all motors? How is it working out, was it reasonablyintuitive to operate?Thanks Alan
From: via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Sent: Thursday, April 21, 2016 5:40 AM
Subject: Re: [PSUBS-MAILIST] Speed controllers
By changing resistors you can use 0 to 5 Vdc.
Cliff
Cliff Redus
On Apr 20, 2016, at 8:08 AM, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Thanks Cliff,I was a bit wary as in my search for BLDC ESCs a lot of their options said "reverse"but were only a programable function that enabled you to changefrom forward to reverse without having to disconnect the wires. You couldn't actually flick a switch on your transmitter & reversethe motor. BTW it says 0-2V on page 26.Cheers Alan
Sent from my iPad
On 20/04/2016, at 11:06 pm, via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Reversing is fully integrated. See page 27 of users manual at http://downloads.ionmc.com/docs/roboclaw_user_manual.pdf for analog control. 0v signal gives full speed one direction, 5v gives full speed in opposite direction and 2.5v is off.
Cliff
Cliff Redus
On Apr 19, 2016, at 10:38 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Cliff / Alec,I couldn't see anything about a reverse function on the USB RoboClaw 2x60A HV Brushed DC motor controller.It may be a bit of work making up the reversing circuit & integrating it with the controller ifit doesn't have that function.Alan
From: via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Sent: Wednesday, April 20, 2016 2:51 PM
Subject: Re: [PSUBS-MAILIST] Speed controllers
At Robotshop.com, the USB RoboClaw 2x60A HV Brushed DC motor controller would work just as well. Each board would control two of the MK101s independently. Has a lot of flexibility on input signal. If you are using PLC, send it a 0-5vdc analog signal.
Cliff
On Apr 19, 2016, at 9:24 PM, Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Thanks Cliff. Is the controller a component you pulled from inside the MK trolling motor or is it a standalone product? I did a few searches and have not turned up anything standalone. I do have such a unit (really old) but it's for a way lower-powered motor than the 101s.
Best,
Alec
On Tue, Apr 19, 2016 at 9:58 PM, via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Alan/Alec, I use Minn Kota 36v controllers for each of my 4 thrusters. They have worked great. They are potted and rugged. They have an internal relay with a dead band around 2.5v signal voltage. This means that absolutely no current flows even if you left the motor controller powered up while in the garage.
My previous motor controller for my big traction motor was from Curtis. This worked great but generated a high pitch noise that was irritating.
Cliff Redus
On Apr 19, 2016, at 6:35 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
What did Cliff use?He has been through this process recently with a 101.Alan
From: Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Sent: Wednesday, April 20, 2016 11:12 AM
Subject: Re: [PSUBS-MAILIST] Speed controllers
No, the one I was considering was not for brushless motors. It's the Roboteq XDC2460, rated for 80A continuous duty per channel. But now I'm looking at Kelly I really like what I'm seeing there too, and Curtis seems to be similar. This will probably come down to a decision between a more advanced dual channel from Roboteq or a super simple single-channel controllers from the likes of Curtis/Kelly. In general if the simpler one can do the job, it's the one I would prefer even if it cost the same.
Thanks guys for all the input!
Alec
On Tue, Apr 19, 2016 at 6:09 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Hi Alec,that one says brushless?On the Kelly faq page for selecting controllers it suggests.....
HOW TO CHOOSE A SUITABLE CONTROLLER FOR THE MOTOR?
Usually the performance will be optimized if the power of the controller is 2.0-3.0 times of the motor's. I guess that means if you have a 2000W motor you get a controller whose continualamp rating X max voltage is at least 4000W. I have heard that it is better to aire on the safe side as some manufacturers over ratetheir controllers. Kelly have a reputation of being good & cheap, & their ratings accurate,however Hugh has had problems with them & I wired up mine yesterday & the ON lightisn't working when powered up. I put power on it once without the pre-ignition resisterso this may have stuffed it, but surely it wouldn't be so fickle!Alan
From: Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Sent: Wednesday, April 20, 2016 9:45 AM
Subject: [PSUBS-MAILIST] Speed controllers
Hi all,
I need to finalize my selection of speed controllers for Shackleton over the next week or so, and at first blush am looking at this one from Roboteq:
http://www.roboteq.com/index.php/docman/motor-controllers-documents-and-files/documentation/datasheets/hbl23xx/59-hbl23xx-datasheet/file
There will be two of them, each driving a pair of MK101 thrusters. Roboteq offers a controller family that is a step down from this and still handles the required amperage, and which is tempting because it's much less expensive. However, the specs are too close for comfort (50A continuous duty rating vs. MK101 requirement of 46A).
Anyone have any suggestions for other cost-effective controllers to consider?
Thanks,
Alec
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160422/6e2cdc9f/attachment-0001.html>
More information about the Personal_Submersibles
mailing list