[PSUBS-MAILIST] Fw:

Mon Sep 28 13:08:38 EDT 2015

Brian,No, look at your shop compressor, most compressor pumps have a screw on pipe thread intake that the filter screws on to.  Put a fitting on that and use a hydraulic hose for the vacuum line.Hank 

     On Monday, September 28, 2015 9:39 AM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Hank,       Your truck's vacuum line?  Brian   
--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Fw:
Date: Mon, 28 Sep 2015 11:43:07 +0000 (UTC)

Brian,Sounds like you are getting there, you might be able to do your vacuum test, that is very rewarding.  I have a trick for that.Hank 

     On Sunday, September 27, 2015 10:37 PM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Hank,              Looks like I will have to push my tea bag test into October !  All the fittings are welded in, getting ready to sand blast and paint.  Have all the parts for the trailer ( 2 - 7K axles , plus a 20K # rated surge brake)  just have to find my balance point.  I plan to put about 2,000 lbs on the tongue or maybe a little less.   Brian

--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Fw:
Date: Sun, 27 Sep 2015 15:12:49 +0000 (UTC)

Brian,How are you making out?  any idea of a test date?  There is a smaller depth gauge on eBay right now that will fit through your hatch :-)  Hank 

     On Sunday, September 27, 2015 9:09 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Brian,I agree, I have a lot of work ahead of me :-)   I am trying to get the dirty work done now while the shop doors can be open.  I had a job cancel at the last minute so I have had a bit of time to work on it.  I will be working full time now for the next month or so :-(Hank 

     On Sunday, September 27, 2015 8:41 AM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Looks impressive Hank !   Quite a project ! Brian

--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] Fw:
Date: Sat, 26 Sep 2015 17:50:55 +0000 (UTC)

Here is Gamma with the pod in place, the big ring is fitted and ready to weld in.  The ballast tanks can be lengthened giving  me more free board for shallower launches.  I can lengthen them and put the vertical thrusters between them still.  The Perry thrusters will be mounted under the front ballast tanks on jettisoning mounts.  I need to figure out how to make a cowl to go from the hull to the pod that will to interfere with the pod releasing from the sub.Hank

      On Saturday, September 26, 2015 11:44 AM, xxx xxxxx <mp13 at live.ca> wrote:

    _______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

   _______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

   _______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150928/33447fa5/attachment-0001.html>