[PSUBS-MAILIST] Fw:

[hank pronk via Personal_Submersibles]

Thanks' Pete,This is a two compartment tank.  The cowl is split in two, the bottom half is fixed and the top half is hinged to open like the hood of a car.  There is room under the cowl for a 24 inch truck inner tube, used for surface stability when inflated.  Hank 


     On Wednesday, November 11, 2015 3:21 PM, Pete Niedermayr via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
   

 Nice job Hank. How are you gonna plumb it ? As how many tanks ? I see you have the cowling on. What can you tell us about that ? 

Pete
--------------------------------------------
On Wed, 11/11/15, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: [PSUBS-MAILIST] Fw:
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Date: Wednesday, November 11, 2015, 2:21 PM
 
 Hey guys
 have a look at my new ballast tank, note the hole through it
 for thruster .Hank
 
      
  On
 Wednesday, November 11, 2015 1:17 PM, xxx xxxxx
 <mp13 at live.ca> wrote:
    
 
  
 
  
 
 
 
 
 
 
 
      
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151111/86fe7474/attachment-0001.html>