[PSUBS-MAILIST] Hull construction cost

Sat May 2 16:49:28 EDT 2015

Alan,
Are you reconsidering your plan for cast aluminum?
Hank--------------------------------------------
On Sat, 5/2/15, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] Hull construction cost
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Saturday, May 2, 2015, 3:30 PM

 Hi, thanks
 but I am after a ball park "hull
 only"manufacturing
 cost for standard construction methods,to
 compare it with other materials &
 processes.Alan

  From: via
 Personal_Submersibles
 <personal_submersibles at psubs.org>

 To:
 personal_submersibles at psubs.org 
  Sent: Sunday, May 3,
 2015 5:10 AM
  Subject: Re:
 [PSUBS-MAILIST] Hull construction cost

 Hank I am
 around Duluth Mn. I don't think bringing it across the
 border 
 would be a problem.

 Dean

 In a
 message dated 5/2/2015 11:12:49 A.M. Central Daylight Time, 
 personal_submersibles at psubs.org writes:

 Dean,
 Where are you located, would you haul it over
 the 
   boarder into Canada?
 Hank--------------------------------------------
 On 
   Sat, 5/2/15, via Personal_Submersibles
 <personal_submersibles at psubs.org> 
   wrote:

 Subject: Re:
 [PSUBS-MAILIST] Hull construction cost
 To: 
   personal_submersibles at psubs.org
 Received:
 Saturday, May 2, 2015, 10:48 
   AM

 Alan
 and all. I have a 350, and it needs a good
 home.
 For 
   just the basic hull I will let it go to the right
 person for 7,000. 

 That is a lot less then I have
 in it. I also have all kinds of goodies 
   to go with it.
 All the extra stuff 
 can be had for what I paid 
   for
 it. I can even transport for the right

   price.

 Dean

 In a
 message dated 5/2/2015 7:49:02 
   A.M. Central
 Daylight Time, 
 personal_submersibles at psubs.org 
   writes:

 Not intending to be flip, but it's worth 

    whatever someone is willing to pay
 for it.  From 
   my
 experience a used 

 K350 in dive condition can be sold 
   for about 20-30k
 depending upon 
    accessories.  When I 
   was in the mood to sell the K600, I
 asked
 for 40K 
    but was 
   only offered between 25-35k so I held on to it
 (glad I did now).  

    Dean Ackman is selling his K350 for
 a ridiculously 
   low
 price (in my opinion), 
    check it out on the web 
   site.

 On
 5/2/2015 12:38 AM, Alan
 James via 

   Personal_Submersibles wrote:

      Any
 guesses on
 what the hull 

      component of a submarine would cost
      to 
   the
 stage where it was 

    ready for painting & 
   without view ports in.

 Including
 labour.

      Either
 K250, 350 or similar 
      size 
   sub.
      Thanks
 Alan

 _______________________________________________
 Personal_Submersibles 
   mailing 
   list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 _______________________________________________
 Personal_Submersibles 

    mailing 

   list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 -----Inline 
   Attachment 
   Follows-----

 _______________________________________________
 Personal_Submersibles 
   mailing 
   list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 _______________________________________________
 Personal_Submersibles 
   mailing 
   list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 -----Inline Attachment Follows-----

 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles