[PSUBS-MAILIST] Taper transition between tower parts

[André Eriksen via Personal_Submersibles]

Hi all,

Regarding transition on tower reinforcement and tower;
I designed the outer diameter to match, and will get a 18mm step on the
inside. Should i put a taper on the reinforcement to match the inside
diameter of the tower?

4:1 taper?

Regards
André
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150323/c70d9936/attachment.html>