[PSUBS-MAILIST] LED light bar

[hank pronk via Personal_Submersibles]

Thanks Ken,
Is it possible to dim these lights?  like a dimmer switch of some sort
Hank--------------------------------------------
On Sun, 6/21/15, Ken Martindale via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] LED light bar
 To: "'Personal Submersibles General Discussion'" <personal_submersibles at psubs.org>
 Received: Sunday, June 21, 2015, 8:54 PM
 
 Nice to hear,
 
 Ken Martindale
 
 -----Original Message-----
 From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org]
 On Behalf Of hank pronk via
 Personal_Submersibles
 Sent: Sunday, June 21,
 2015 8:10 PM
 To: personal_submersibles at psubs.org
 Subject: [PSUBS-MAILIST] LED light bar
 
 Success, my new light bar is
 installed and full of oil.  It was remarkably
 easy, the end caps come off the bar and are
 quite heavy, so tapping a 1/8
 pipe thread
 was easy.  I filled the light while the end cap was off
 then
 reassembled it and topped it up through
 the hose fitting.  I have a p trap
 line
 (1/8 nylon)  and the whole conversion takes less than an
 hr.  The light
 works just fine, maybe not
 as bright as my halogen lights but much easier on
 power.  The light runs on 10 amps at 24V.
 24,000 lumen Hank
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles