[PSUBS-MAILIST] Over Pressure Valve

via Personal_Submersibles personal_submersibles at psubs.org
Fri Jun 19 21:58:17 EDT 2015


Yup, Alan, that's me.  I'm using Psubs vernacular as in a  1ATM sub having 
an internal pressure equal to sea level pressure or 1ATM or 14.7  psi 
(absolute pressure).  You're using the vernacular I use when I'm  airing up the 
tires on my trailer and say I have 32 psi in the tire (tyre to  you).  In that 
conversation we're referring to differential or gauge  pressure.  Since 
your vessel is an ambient, I can where the confusion would  come in.
 
Now about you guys in NZ having winter in the middle of  summer...
 
JT
 
 
In a message dated 6/19/2015 8:42:43 P.M. Central Daylight Time,  
personal_submersibles at psubs.org writes:

 
Hi Jim,
as you were talking of pressures in a range  outside of
that of a normal barometer, it was assumed  that you were talking 
about a normal pressure gauge reading &  using standard vernacular.
That's Jim Todd isn't  it. I don't want to get too cheeky with the wrong 
person:)
Cheers  Alan


 
  
____________________________________
 From: via Personal_Submersibles  <personal_submersibles at psubs.org>
To: personal_submersibles at psubs.org  
Sent: Saturday, June 20,  2015 12:52 PM
Subject: Re:  [PSUBS-MAILIST] Over Pressure Valve



 
Hi Alan,
I'm speaking in terms of absolute  pressure.  That is, pressure at the 
surface being 14.7 psi or 1 atm  and water pressure at 33 feet deep being 2 atm. 
   I think  you're speaking comparatively as though air pressure at the 
surface  were 0.0 psi.  Right?
Jim 
 
 
In a message dated 6/19/2015 4:46:04  P.M. Central Daylight Time, 
personal_submersibles at psubs.org writes:





 
Jim,
>>> If  the air pressure inside your sub rose to 20 psi or about 1.33 atm,  
you would reach equal pressure when you got within 11 feet of the  surface. 
   No 40ft. 
Alan


 
  
____________________________________
 From: via  Personal_Submersibles <personal_submersibles at psubs.org>
To:  personal_submersibles at psubs.org 
Sent: Saturday, June 20, 2015 7:58  AM
Subject: Re:  [PSUBS-MAILIST] Over Pressure Valve



 
John, I hadn't given much thought lately  to how the Big Boys handle it.  
I've planned to have a small,  onboard compressor, but its purpose is to 
create under-pressure to seal the  domes prior to diving.  It's not large enough 
to charge the  tanks.  I'm depending on a portable compressor dockside or 
on the  support boat for that.  A snorkel would be nice even if it extends  
just two feet above the hatch or dome.  Looking forward to the update  on 
your 65-footer at the convention.
 
Hank, that's definitely a sweet  setup you have on Gamma.  The compressor 
recharged the tanks much more  quickly than I expected.  I don't recall how 
low you let them get  before recharging.  I don't expect to have room 
onboard, and the heat  generated would be something of a negative in semitropical  
conditions.
 
I wish I knew what the pressure  differential was that Captain K. 
experienced.  Apparently it was small  enough that he wasn't aware of it and yet 
significant enough to convert his  coming tower into a personnel launch tube.  
If the air pressure  inside your sub rose to 20 psi or about 1.33 atm, you 
would reach equal  pressure when you got within 11 feet of the surface.  Any 
depth greater  than that and the outside pressure would still be greater than 
the inside  pressure (no OP).  The point being that you would have to have 
a lot of  excess interior pressure to experience OP at a significant depth.  
 Wouldn't your ears tell you if you got as high as 20 psi?  Monitoring  and 
alarm systems are a must.
 
Jim
 
 
Personally I think an  onboard compressor is a much safer option than an 
over pressure valve.   There are multiple safety benefits to an onboard 
compressor, over pressure  being the biggy.  With a compressor you can get rid of 
the pressure  without surfacing and trying to control a perfect ascent.  
With the OPV  you have to surface a bit and let air out and wait then surface 
more and  wait and so on. You can't just surface and hope the valve keeps up 
with the  demand. This is more important for subs with large domes.
The  next benefit to a compressor is, if you lost all your air, you surface 
by  dropping your weight.  In my case the weight is small and I would also  
drop the thruster and tail assembly.  Still, not much sub out of the  
water.  With the compressor, I can open my vent valve in the hatch and  use the 
compressor to fill the ballast tanks.
Hank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles



In a message dated 6/19/2015 12:35:49 P.M. Central Daylight Time,  
personal_submersibles at psubs.org writes:




Hi  Jim:

On the boat if their was an positive  pressure while submerged at depth we 
started the air compressor and charge  the air banks. The other option was 
to raise the snorkel to equalize  before opening the hatch.


John  K.
(203) 414-1000

Sent from my  iPhone

> On Jun 19, 2015, at 3:07 AM, via  Personal_Submersibles 
<personal_submersibles at psubs.org> wrote:
> 
> Jim,
> 
> Thanks for the mental diagram, that helps imensely. Does  any one know 
how the big boys, navy subs, deal with over pressure? Has any  one had their 
OP valve open at depth and if so how much water came in?
> 
> Keith T
> 
> via Personal_Submersibles  <personal_submersibles at psubs.org> wrote:
> 
>> Keith,
>> 
>>  Sorry, I just got home.  I was hoping Alec and some  others with  more 
>> experience than I have would chime in as I  see has now  happened.  
There have 
>> been  some good discussions on OP valves in the  past.  I think some  
have 
>> installed a T (on its side) inside the sub  so  the air enters the 
horizontal 
>> portion,  and any water that comes in  goes down to a small trap or into 
a tube  
>> that leads to a reservoir.   Others just  use a rag to catch the small 
amount 
>> of water.
>> 
>> Alec, does the OP on the  exterior of Snoopy point downward  after it 
exits 
>> at the top?
>> 
>> We've also discussed having an air pressure gauge or  altimeter  set to 
zero 
>> (1 atm) before  diving.  If it indicates any pressure above  that level 
at 
>> anytime during your dive, you'll know you'll have an  over pressure  
situation 
>> to deal with as you  surface and you'll have an indication of how  
severe 
>> that will be.  We've also discussed various  things that could cause  an 
over 
>> pressure  condition.
>> 
>> Best regards,
>> Jim
>> 
>> 
>> In a message dated 6/18/2015 7:09:19 P.M. Central  Daylight Time,  
>>  personal_submersibles at psubs.org writes:
>> 
>> If it opens when submerged, it is because air is on  the way out,  and 
that 
>> prevents water from  coming in. Its like blowing through your nose  
>> underwater, your nose is open but if you're blowing,  you don't get 
water in  your 
>> lungs.  
>> 
>> 
>>  Certainly you do get a little water in if you push the valve open   
manually 
>> while submerged, as a test. Or a few  drops if you do so when surfaced  
to 
>>  equalize, as the valve is all wet. But its nothing much.
>> 
>> 
>> 
>> Best,
>> 
>>  Alec
>> 
>> 
>> 
>> On Thu, Jun 18, 2015 at 7:19  PM, Ken Martindale via  
Personal_Submersibles 
>>  <_personal_submersibles at psubs.org_  
(mailto:personal_submersibles at psubs.org) 
>>>  wrote:
>> 
>> TEST!!!
>> 
>> -----Original   Message-----
>> From: Personal_Submersibles 
>> [mailto:_personal_submersibles-bounces at psubs.org_  
(mailto:personal_submersibles-bounces at psubs.org) ]  On Behalf Of via  
>> Personal_Submersib
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles






_______________________________________________
Personal_Submersibles mailing list
_Personal_Submersibles at psubs.org_ (mailto:Personal_Submersibles at psubs.org) 
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles










_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles





_______________________________________________
Personal_Submersibles mailing list
_Personal_Submersibles at psubs.org_ (mailto:Personal_Submersibles at psubs.org) 
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles









_______________________________________________
Personal_Submersibles  mailing  list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150619/1217d795/attachment-0001.html>


More information about the Personal_Submersibles mailing list