[PSUBS-MAILIST] grease question

[Brian Cox via Personal_Submersibles]

Hank,  That's good to know !!

Brian

--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] grease question
Date: Fri, 24 Jul 2015 17:36:04 -0700

Brian,
Nope, will be fine.  I had a seal problem on the final shaft that holds my prop.  Normally it is oil filled and I had no time to fix it, so I screwed in grease nipples and filled it full of grease.  No problem with oil slick. 
Hank
--------------------------------------------
On Fri, 7/24/15, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: [PSUBS-MAILIST] grease question
 To: "PSubs" <personal_submersibles at psubs.org>
 Received: Friday, July 24, 2015, 6:15 PM
 
 Hi
 All,            
 I have a number of bevel gear 90's that will be isolated
 within delron housings in fairly tight tolerances, 
 I'm wondering if I put some heavy grease around the
 bevel gears ( they are not stainless) , do you think that I
 will get any kind of tell tail oil slick problems?  I
 was going to go with all stainless but when I saw the
 price tag I changed my mind, they are the only non stainless
 part of my
 linkage. Brian 
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles