[PSUBS-MAILIST] Prestressed hull constructed of coiled tubing

[Brian Cox via Personal_Submersibles]

Marc,   need a picture !   I'm a visual kind of guy !

Brian

--- personal_submersibles at psubs.org wrote:

From: Marc de Piolenc via Personal_Submersibles <personal_submersibles at psubs.org>
To: Psubs mailing list <personal_submersibles at psubs.org>,        International Psubs Minisubs <international_psubs_minisubs at yahoogroups.com>
Subject: [PSUBS-MAILIST] Prestressed hull constructed of coiled tubing
Date: Sun, 5 Jul 2015 17:31:12 +0800

While looking for something else (roof shell information for my future 
house) I blundered into a 1975 thesis by Gerald Webb about the strength 
of prestressed cylinders made of coiled tubing.

This set off a bright light in my skull, because I had actually seen the 
diagram of a pressure hull of a naval minisub with this kind of 
structure, but at the time had no idea of what it meant.

It makes a helluva lot of sense - building a tubing coil is almost 
certainly cheaper than building an accurate metal plate cylinder roller.

No information yet on what is done with the ends - haven't gotten that 
far. The document itself is on Scholar's Archive at OSU.

Marc
-- 
Archivale catalog: http://www.archivale.com/catalog
Polymath weblog: http://www.archivale.com/weblog
Translations (ProZ profile): http://www.proz.com/profile/639380
Translations (BeWords profile): http://www.bewords.com/Marc-dePiolenc
Ducted fans: http://massflow.archivale.com/
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles