[PSUBS-MAILIST] Removable tru hulls

[hank pronk via Personal_Submersibles]

Scott,
Why such a big penetrator plate for just control wires?
Hank--------------------------------------------
On Fri, 1/16/15, Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] Removable tru hulls
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Friday, January 16, 2015, 11:53 AM
 
 Scott,
 please not there! I did it, and it took me weeks to correct
 the weld distortion. I had to build a custom tool to
 re-machine the seat in place. Give me a call if my last
 email was not clear.
 Best,
 Alec 
 On Fri, Jan 16, 2015 at
 11:45 AM, swaters at waters-ks.com
 via Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 I think I just figured
 out how I am going to do it. I will put the pentrator on the
 bottom of the sub in between the ribs. Both manipulator arms
 can share the single penetrator and hook right into the
 hydrolic resevor box. Thanks!Scott Waters
 
 Sent from my U.S.
 Cellular® Smartphone
 
 -------- Original message --------
 From: via Personal_Submersibles  
 Date:01/16/2015  9:14 AM  (GMT-06:00)
 
 To: personal_submersibles at psubs.org
 
 Subject: Re: [PSUBS-MAILIST] Removable tru
 hulls 
 
 It's not hard to do
 that. You put the quick disconnects out near the arm release
 point and whatever disconnects it, also disconnects the
 hydraulics. Personally, I'd rather have extra viewports
 on either side of the big window. I do know that you have to
 avoid compromising the knuckle where the head transitions
 from cylinder to ellipse. 
 Vance
 
 
 
 
 
 
 -----Original Message-----
 
 From: swaters at waters-ks.com
 via Personal_Submersibles <personal_submersibles at psubs.org>
 
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
 
 Sent: Fri, Jan 16, 2015 9:33 am
 
 Subject: Re: [PSUBS-MAILIST] Removable tru hulls
 
 
 
 
 
 
 
 
 
 
 Vance,
 
 They are 7", but I wanted to put them somewhat
 close to my main veiwport which has a fairly big tru hull of
 I believe 20" ( I would have to measure to confirm).
 The reasoning for this is I am making the control with sub
 cons so if I disconnect the arm and pull straight back, the
 plugs will disconnect. If I have to put the removeable
 7" plate on the side of the sub, I would have to find
 some way to put everything at a 90°.
 
 Thanks,
 
 Scott Waters
 
 
 
 
 
 
 
 
 
 
 Sent from my U.S.
 Cellular® Smartphone
 
 
 
 
 
 
 
 -------- Original message --------
 
 From: via Personal_Submersibles  
 
 Date:01/16/2015  8:17 AM  (GMT-06:00) 
 
 To: personal_submersibles at psubs.org
 
 
 Subject: Re: [PSUBS-MAILIST] Removable tru hulls 
 
 
 
 Scott,
 
 Not sure about the
 engineering, but George told me that if things were about a
 diameter apart, then they would be okay. Maybe one of the
 guys will crunch the numbers. How big are these penetrators
 going to be?
 
 
 
 Vance
 
 
 
 
 
 
 
 
 
 
 -----Original Message-----
 
 
 From: swaters at waters-ks.com
 via Personal_Submersibles <personal_submersibles at psubs.org>
 
 
 To: psubs <personal_submersibles at psubs.org>
 
 
 Sent: Fri, Jan 16, 2015 9:01 am
 
 
 Subject: [PSUBS-MAILIST] Removable tru hulls
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 I am putting two removeable tru hulls in Trustworthy
 (same as Alec) for my manipulator arms. I want to put them
 close to the front veiw port of the sub. I know if I get to
 close to the front veiw port it hurts the structure. How
 close can I get to it and still not hurt the
 structure?
 
 
 
 Thanks,
 
 
 
 Scott Waters
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 Sent from my U.S.
 Cellular® Smartphone
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
  
 
 
 
 
 
 
 _______________________________________________
 
 Personal_Submersibles mailing list
 
 Personal_Submersibles at psubs.org
 
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
 
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles