[PSUBS-MAILIST] Fw:

[swaters@waters-ks.com via Personal_Submersibles]

Hank I have two concerns about the HY-100. 
1) Cost. Dan has told me in the past HY-100 or HY-80 is 3 time the price per pound than 516 gr 70. Not sure dollar wise what that will be
2) Welding process. Dan told me that this is very difficult to weld. You have to put it in a kiln to pre heat and weld inside it at 500 degrees. After that he said it still cracks and you have to gouge and reweld no matter how good a welder you are and you have to reweld it. 

There is obviously alot of research I have to do to understand it first. 

What is the supplier Hank?

Thanks,
Scott Waters


Sent from my U.S. Cellular® Smartphone


-------- Original message --------
From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> 
Date:01/08/2015  7:56 PM  (GMT-06:00) 
To: personal_submersibles at psubs.org 
Subject: [PSUBS-MAILIST] Fw: 

Scott,
I found HY-100 supplier with 1 ton min order
Hank

--- On Thu, 1/8/15, hank pronk <hankpronk at live.ca> wrote:

> From: hank pronk <hankpronk at live.ca>
> Subject: 
> To: "hanker_20032000 at yahoo.ca" <hanker_20032000 at yahoo.ca>
> Received: Thursday, January 8, 2015, 8:54 PM
> 
> 
> 
>        
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150108/621ba8c9/attachment.html>