[PSUBS-MAILIST] SCUBA Tank Connectors

[Alec Smyth via Personal_Submersibles]

Hi Mark,

I get all that sort of hardware from the place below. They have every
adapter you can think of, and will combine them for you to make whips of
the right length, oxygen cleaned, etc. Whatever you need.

http://www.deep-six.com/page30.htm


Best,

Alec


On Tue, Jan 6, 2015 at 7:44 AM, swaters at waters-ks.com via
Personal_Submersibles <personal_submersibles at psubs.org> wrote:

> Mark,
> A great way in my opinion is is standard scuba tank filling whip. You can
> have them made without the pressure release so you don't have to worry
> about the pressure release comming undone and having a external leak.
> Thanks,
> Scott Waters
>
>
> Sent from my U.S. Cellular® Smartphone
>
>
> -------- Original message --------
> From: Mark via Personal_Submersibles
> Date:01/06/2015 6:26 AM (GMT-06:00)
> To: Personal Submersibles General Discussion , Mark Widman
> Subject: [PSUBS-MAILIST] SCUBA Tank Connectors
>
> Folks,
>
> I know many of the PSUBs members use SCUBA tanks as the source for ballast
> air.  Can you tell me the best (and cheapest) way to connect 4 external
> SCUBA air tanks?  I'm using a single NPT thru hull fitting with stainless
> braided hoses to connect the incoming SCUBA Tank air to an internal
> regulator.
>
> I'm looking for the best way to interface to the a SCUBA tanks.  As
> always, I appreciate your thoughts.
>
> Regards,
>
> Mark...
>
> Sent from iPhone.
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150106/28e1eb1e/attachment.html>