[PSUBS-MAILIST] minn-kota cabling to hull

[Jon Wallace via Personal_Submersibles]

That might be the compromise I'm looking for.
Thanks.

On 4/22/2015 2:02 PM, Emile van Essen via Personal_Submersibles wrote:
> Jon,
>
> Can be about the same construction. The cable sheat is indeed a issue. I
> sealed that with RTV. Not on drawing. Can be also done with a low pressure
> cable gland.
> 15 Bar for the Blueglobe is conservative or a high safety factor. They fail
> single at 80 Bar and back to back  (in penplate) at 140 Bar. Failure mode is
> sliding inwards so even no leak then,
>
> Emile
>
>
>