[PSUBS-MAILIST] MK 101 shaft thread

[Cliff Redus via Personal_Submersibles]

Jon the shaft on the MK-101 is 1/2" diameter nominal (0.495" actual) with a threaded stud on the end that has a UNF 3/8-24 thread. 

Cliff




Cliff Redus
Redus Engineering
USA mobile:  830-931-1280
cliffordredus at sbcglobal.com 
      From: Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Wednesday, April 22, 2015 11:51 AM
 Subject: [PSUBS-MAILIST] MK 101 shaft thread
   

I know somebody out there must have this info...what's the size and 
thread of the shaft that fits into the MK101 motor head?

Jon

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150422/28a00f2b/attachment.html>