[PSUBS-MAILIST] bilge pump

Mon Oct 6 09:03:28 EDT 2014

The exception being for passenger submersibles, as per ABS 11/49.9.

That said, I think some water ingress is inevitable, even if it is just from admitting rain through an open hatch or spilling your coffee, and I would consider this in design, even if just to ensure accessability to these spaces for mopping up.

Sean

On October 5, 2014 12:38:15 PM MDT, Vance Bradley via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>Not required.
>Vance
>
>Sent from my iPhone
>
>> On Oct 5, 2014, at 1:54 PM, hank pronk via Personal_Submersibles
><personal_submersibles at psubs.org> wrote:
>> 
>> Are bilge pumps common or required by ABS, if so are they high
>pressure or low pressure for the surface only.
>> Hank
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20141006/59470ac0/attachment-0001.html>