[PSUBS-MAILIST] annealing acrylic

[hank pronk]

Brian,
Are you going to anneal your windows yourself?  
Hank 



On Monday, March 24, 2014 6:03:10 PM, Brian Cox <brian at ojaivalleybeefarm.com> wrote:
  
Used my polarized lenses on the newly cut piece and it appears clouded throughout the whole piece.  Where as another piece I have, you can clearly see a stress area around where it has been drilled. 

Brian


--- emile at airesearch.nl wrote:

From: "Emile van Essen" <emile at airesearch.nl>
To: "'Personal Submersibles General Discussion'" <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] annealing acrylic
Date: Mon, 24 Mar 2014 22:40:46 +0100


As far as I know it is
only cast. 
  
Regards, Emile 
  

________________________________
  
Van:Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] Namens Brian Cox
Verzonden: maandag 24 maart 2014
20:37
Aan: PSubs 
Onderwerp: [PSUBS-MAILIST]
annealing acrylic 
  
I'm planning on annealing my viewports,  does anyone
know if the acrylic from the factory is pre-shrunk ? 
  
Brian _______________________________________________
Personal_Submersibles mailing list Personal_Submersibles at psubs.org http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles  
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140324/3a6a6e23/attachment.html>