[PSUBS-MAILIST] Hull Transitions

[Joe Perkel]

Thanks Vance, precisely what I was looking for.

Joe



On Saturday, January 4, 2014 8:42 PM, Vance Bradley <Vbra676539 at AOL.com> wrote:
  
The ASME boiler code has all that. And the conical transition welds are NOT reinforced any mire than a hemi to a cylinder would be.
Vance

Sent from my iPhone

On Jan 4, 2014, at 8:34 PM, Joe Perkel <josephperkel at yahoo.com> wrote:


Busby is unclear as to how a transition from cylinder to cone is accomplished (fabricated). Ala PC 14 for example. Is the weld joint reinforced or is it simply an abrupt change in angle? 
>
>The issue is relevant in an attempt to reduce volume within the pressure hull where only machinery/equipment is intended to reside.
>
>Is there a text or diagram somewhere that covers such transitions?
>
>Thanks
>
>Joe
>
>Sent from Yahoo Mail for iPad 
_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140104/a9745691/attachment.html>