[PSUBS-MAILIST] Submarine Escape Immersion Equipment (SEIE) MK-10

[Brian Cox via Personal_Submersibles]

Hank,
      Those submarine immersion suits look even bulkier, especially because they have a small life raft as well, not sure if the life raft is a separate piece though.  

  BTW, conning tower is complete now with 8 viewports all welded in, also making progress on the hatch, have one ring welded on as well as the small hatch viewport and the thru hatch shaft fitting in the center (7/8").

brian

--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Submarine Escape Immersion	Equipment	(SEIE)	MK-10
Date: Sun, 28 Dec 2014 08:16:06 -0800


Brian,
I just tested the Steinke Hood through my hatch opening.  I was wrong, I can fit through, but I have stiky outy parts that could catch on the appliance, I forgot that that was the issue.  It is a snug fit but doable.   I will try it with the emersion suit on next.
Hank--------------------------------------------
On Sat, 12/27/14, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] Submarine Escape Immersion Equipment	(SEIE)	MK-10
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Saturday, December 27, 2014, 10:45 PM
 
 Hnak,   Were you able
 to get into the suit inside the sub?  I assume you
 tried this on dry land.
 
 Brian
 
 --- personal_submersibles at psubs.org
 wrote:
 
 From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
 Subject: Re: [PSUBS-MAILIST] Submarine Escape Immersion
 Equipment (SEIE)    MK-10
 Date: Sat, 27 Dec 2014 15:53:42 -0800
 
 Brian,
 I carry both a hood and an emersion suit.  I got the
 Stinke hood on ebay.  There is a you tube video on how
 to use it.  You would have to inflate the hood-vest
 outside the sub.  It will not work through the 18 inch
 hatch, I tried.
 Hank 
 --------------------------------------------
 On Sat, 12/27/14, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 
  Subject: [PSUBS-MAILIST] Submarine Escape Immersion
 Equipment (SEIE) MK-10
  To: "PSubs" <personal_submersibles at psubs.org>
  Received: Saturday, December 27, 2014, 6:28 PM
  
  Hi
  All,                 
  Starting in 2015 there is a new law ( like we need more)
  that if you are a commercial vessel operating outside 3
  miles off shore you are required to have a immersion
  suit.  Your obviously not required to have one for
  submarine escape but the other type.  However I found
  this MK-10 type through my searching, can these be
 purchased
  somewhere?  Are they only available thru a Navy? I
  wasn't able to find one for sale.  And could
  someone get thru a 18" hatch with this contraption
  on? http://en.wikipedia.org/wiki/Submarine_Escape_Immersion_Equipment http://www.globalsecurity.org/military/systems/ship/systems/mk-10-seie.htm  Brian
  -----Inline Attachment Follows-----
  
  _______________________________________________
  Personal_Submersibles mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles