[PSUBS-MAILIST] Rotary Seal

[hank pronk via Personal_Submersibles]

Alan,
It seems that trolling motor seals work pretty good, what about them.  Are you planning a high rpm?  
Hank
--------------------------------------------
On Mon, 12/1/14, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: [PSUBS-MAILIST] Rotary Seal
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Monday, December 1, 2014, 8:44 PM
 
 Has anybody got any recomendations on a rotary
 seal type for my thruster propeller shaft. Looked at the Parker
 seal pdf & there seems a lot of options.I am wanting to oil compensate using the 3 cst
 silicone oil that Carsten recomended,& intend to have about 4 psi internal pressure
 above ambient.ThanksAlan
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles