[PSUBS-MAILIST] rpm

[via Personal_Submersibles]

Hank,
Did you check the amperage? I wonder if the resistance causes a higher draw, and if so, how much?
Vance



-----Original Message-----
From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: personal_submersibles <personal_submersibles at psubs.org>
Sent: Fri, Aug 29, 2014 3:33 pm
Subject: [PSUBS-MAILIST] rpm


I am working on a hydraulic pump that will be external and pressure compensated 
in oil.  I am using a trolling motor to drive the pump.  A while back there was 
a question about rpm drop when a trolling motor is filled with oil.  I bench 
tested that today, and the motor runs at 2,000rpm stock and 1,800 rpm full of 
WD40.
Hank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140829/d61ed282/attachment.html>