[PSUBS-MAILIST] MK-101 Connectors

[Alan James via Personal_Submersibles]

Hi Jon,
thanks for that info, that helps with the descision making.
They have a penetrator series which has a cable running off the penetrator, which would
be ideal for fitting into the blueglobes. However I can't see any with the power we need.
I will try & get hold of some of the gold connectors James suggested & some 8 & 10AWG
cable to work out whether you could pull the wires + gold connector through the 32mm
fitting the blue globe screws in to.
Alan



________________________________
 From: Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
Sent: Saturday, August 2, 2014 4:50 AM
Subject: Re: [PSUBS-MAILIST] MK-101 Connectors
 


The HPBH4 (m/f) hi-power 50amp per pin (total 4 pins and 200 amps) 
threaded 3/4-16 is going to be right around $180 (US).  The cable 
version including two feet of cable is around $115 (US).  They don't 
have a two pin model strong enough for our needs but are going to look 
at whether they can make it or find one from some other source that will 
work.

So the four pin solution that covers the power requirements of the MK101 
would be right around $300 per motor if you used a threaded female 
bulkhead fitting for the hull and a cabled male fitting either potted or 
globed into the motor.




_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140801/ac9f0a1d/attachment.html>