[PSUBS-MAILIST] K3000 spherical shell calculations

["Carsten Standfuß "]

Okay Sean.. and now again with carbon fiber ín a ceramic matrix..

:-O & :-) vbr Carsten 

"swaters" <swaters at waters-ks.com> schrieb:
> Wow. Thanks Sean. I really appriciate the calculations!
Thanks,
Scott Waters




Sent from my U.S. Cellular© Smartphone"Sean T. Stevenson"
<cast55 at telus.net> wrote:Scott, my pressure hull optimization software
project has been sitting idle on the back burner for some time now. 
Nevertheless, some of the modules work, so I ran your numbers through
the spherical shell calculator.  The results shown below are in
compliance with the most recent ABS rules, with no additional safety
factor added.  I used your 6' dimension as the inner diameter, and
incremented shell thickness 0.0001 m at a time until the desired working
depth was reached.  Executive summary:  0.0378 m (1.4882 in) for A516 gr
70, and 0.0208 m (0.8189 in) for HY-80.  Details below:





Let me know if you want to run additional scenarios.

Sean


 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140410/7b51b4a2/attachment.html>