[PSUBS-MAILIST] Fwd: Help

[Alec Smyth]

It does not appear (per Google) that there is any such thing as a John
Crane #883. But here's a typical mechanical seal for a pump, and in this
case for a .875" shaft.

http://www.mcmaster.com/#9281k256/=og76kj


On Tue, Sep 10, 2013 at 2:33 PM, swaters <swaters at waters-ks.com> wrote:

> It is a type 883, .875 shaft seal -J CRANE Packing Co.
> I think that is right but the kitteredge blue prints are so hard to read
> after being copied over and over.
> Thanks,
> Scott Waters
>
>
>
>
> Sent from my U.S. Cellular© Smartphone
>
> "Smyth, Alec" <Alec.Smyth at covisint.com> wrote:
>
> Scott, do you have any part number, specs, etc.? Sorry, I don’t have K-350
> drawings.****
>
> ** **
>
> *From:* Personal_Submersibles [mailto:
> personal_submersibles-bounces at psubs.org] *On Behalf Of *swaters
> *Sent:* Monday, September 09, 2013 7:53 PM
> *To:* personal_submersibles at psubs.org
> *Subject:* [PSUBS-MAILIST] Fwd: Help****
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> Sent from my U.S. Cellular© Smartphone****
>
>
>
>
> -------- Original message --------
> Subject:Help
> From:swaters <swaters at waters-ks.com>
> To:personal_submersibles at psubs.org
> Cc:
>
> ****
>
> In trying to finalize my sub I realized the seals I ordered for the
> thrusters are not the same as for the main motor. Does anyone know where to
> get the seal for the main motor? Please help.****
>
> Thanks,****
>
> Scott Waters****
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> Sent from my U.S. Cellular© Smartphone****
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20130910/2c5ca3c7/attachment.html>