[PSUBS-MAILIST] buoyancy

[Joe Perkel]

Maybe Vance can weigh in on this but, I suspect that those webs serve to evenly distribute shock loads for deck handling.

Joe

Sent from my overpriced 
iPhone

On Nov 7, 2013, at 4:37 PM, Jon Wallace <jonw at psubs.org> wrote:

> 
> I can't comment on the structural pros/cons but can tell you that the 600 plate is still in fine condition after 30+ years.  It bothers me as well since even after a good rainfall water collects there, but if properly painted it shouldn't be a big problem.  Maybe give it some extra coats in that area.
> 
> Jon
> 
> 
> On 11/7/2013 2:18 PM, Land N Sea wrote:
>> 
>> I also mentioned the other week about my desire to omit the plate that is welded to the pressure hull and battery             pod of a K-350 and was wondering if any one could comment on that.
>>  
>> Rick
>> 
>> 
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20131107/beb70f16/attachment.html>