[PSUBS-MAILIST] MK 101 Kort Nozzle Assembly

[Alan]

Joe,
Here's a video on lost foam casting with aluminium in case 
anyone's  not familiar with it.
The end product in this video looks a bit rough, but in our case
Imperfections could be filled in with bog & painted over.
http://m.youtube.com/watch?v=9bYVQ8ypHss&desktop_uri=%2Fwatch%3Fv%3D9bYVQ8ypHss
Alan

Sent from my iPad

On 2/11/2013, at 9:15 PM, Alan <alanlindsayjames at yahoo.com> wrote:

> Following it now Joe, thanks.
> I would still cast  the nozzle out of aluminium & make a jig for welding the 
> struts & motor clamp if I were mass producing them.
> Alan
> 
> 
> Sent from my iPad
> 
> On 2/11/2013, at 12:39 PM, Joe Perkel <josephperkel at yahoo.com> wrote:
> 
>> Alan,
>>  
>> Added an exploded view, another builder had some questions as well.
>>  
>> Joe
>> 
>> From: Alan James <alanlindsayjames at yahoo.com>
>> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
>> Sent: Friday, November 1, 2013 4:30 PM
>> Subject: Re: [PSUBS-MAILIST] MK 101 Kort Nozzle Assembly
>> 
>> Looks good Joe.
>> Is there an exploded view available?
>> Alan
>> <Exploded.jpg>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20131102/1acc94cb/attachment.html>