[PSUBS-MAILIST] MK 101 Kort Nozzle Assembly

[Alan James]

Looks good Joe.
Is there an exploded view available?
Alan


________________________________
 From: Joe Perkel <josephperkel at yahoo.com>
To: Psubbers Mailist <personal_submersibles at psubs.org> 
Sent: Saturday, November 2, 2013 7:13 AM
Subject: [PSUBS-MAILIST] MK 101 Kort Nozzle Assembly
 


Psubbers,
 
I have finalized the design of the Kort Nozzle assembly for a Minn Kota 101 as per the dimensions provided me by another builder. There are a few detail pictures on my project page. http://www.psubs.org/projects/1371101163/msvalvinjr./
 
Some assumptions, this is drawn for 11 3/8' dia square tip prop, 3 7/8" body, again with dimensions provided. It requires a concentric attach ring as you see here in SS in the style of a propeller shaft anode. The beauty of that is that it allows fore and aft adjustment as required.
 
I will provide the CAD files and 2d drawings with B.O.M, required to Jon for download over the next week or so for whatever process a builder chooses. The nozzle can be scaled to accommodate other prop and body dimensions as required.
 
Doing these little projects will help me tremendously when my time comes to build.
 
Joe
 
 
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20131101/2702d3b8/attachment.html>