[PSUBS-MAILIST] Trailer

[swaters]

If you use the telescoping idea, how big of square tubing do you need to do a 20' stretch?
Thanks,
Scott Waters




Sent from my U.S. Cellular© Smartphonehank pronk <hanker_20032000 at yahoo.ca> wrote:Hi Scott,
That is a question with no right answer.  It totally depends on your boat ramps.  If I understand you, your choosing between a extension pole between truck and trailer and a telescopic reach.  If your boat ramps have a sharp angle at the crest then a telescopic reach may drag on the ground.  I like the telescopic reach idea because you can just pull a pin then drive ahead until the reach is extended.  Put the pin back in the new spot and your away.  If you have limited help that is the way to go.


On Friday, December 13, 2013 8:02:30 AM, swaters <swaters at waters-ks.com> wrote:
I am working on modifying my trailer so I can launch my sub myself. I have 2 ideas. One is the conventional idea of havinga second tounge extension trailer so I can get the length to launch the boat. The second is to have a long touge that replaces the hitch and the long tounge has a hitch on it? Any reccomendations?
Thanks,
Scott Waters




Sent from my U.S. Cellular© Smartphone

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20131213/06a6950c/attachment.html>