[PSUBS-MAILIST] grounding question

[Smyth, Alec]

Hi Scott,

If I understand you correctly, it sounds like you might have wired her as you would a car, with cables for the positive and using the chassis for the negative. This is a steel boat, so instead of that, what one does is two cables, one for positive and one for negative, but both of them equally isolated from the hull. Else, you are inviting a case of accelerated corrosion.

Best,

Alec

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of swaters
Sent: Monday, December 09, 2013 12:57 AM
To: Personal Submersibles General Discussion
Subject: Re: [PSUBS-MAILIST] grounding question

I connected mine to the electrical pannel through the body of the sub
Thanks,
Scott Waters




Sent from my U.S. Cellular© Smartphone

brian <brian at ojaivalleybeefarm.com<mailto:brian at ojaivalleybeefarm.com>> wrote:
Hi All,
              On the K boats where does one normally connect the ground to the sub?

Brian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20131209/f8907a68/attachment.html>